Meinberg GNSS Antenna

Meinberg GNSS Antenna

GNSS Antenna

APC Technology Group plc

Multi GNSS Antenna : L1 GPS/Galileo/GLONASS/BeiDou Antenna

GPS / Galileo / GLONASS / BeiDou Antenna with Integrated Lightning Protection.

The Multi GNSS L1 antenna has been specifically designed for long-lasting, trouble-free deployments in congested cell-site applications.

> Request a quote

Multi GNSS Antenna Technical Specifications

Type of antenna40 dB GPS L1/GLONASS L1
Antenna with Integrated Lightning Protection
Frequency Band: 1575.42 ± 10 MHz / 1602-1615 MHz
Antenna Gain: ≥ 3.5 dBic / ≥ 3 dBic
Nominal Impedance: 50 ohms
Datasheet GLONASS/GPS Antenna
Physical dimensions: 7.25” H x 3.2” D
Antenna connector: type-N connector
Power supply: 3.3 – 9.0 V DC
Protection: IP67
Ambient temperature: -40°C to +85°C
Warranty: Two-Year Warranty
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

 

> Click to view product manuals and additional Multi GNSS Antenna product information on the Meinberg website

APC Technology Group plc

GPSANT Ex-PROOF: Explosion proof active GPS L1-Antenna

Explosion proof active GPS L1-Antenna for areas where hazardous substances may occur.

Meinberg’s explosion proof antenna consists of a passive antenna and a stainless-steel housing including a 40dB amplifier.

> Request a quote

GPS EX-PROOF Technical Specifications

Type of antenna:
Top centered installed passive antenna, Ex II 2G Ex d IIB T5 (ATEX)
with integrated 40dB amplifier
Voltage U = 3 – 16 V DC, Current I typ.= 20mA
Conformity:
ATEX-Directive 2014/34/EU
EMC-Directive 2004/108/EC
RoHS-Directive 2002/95/EC
Explosive Atmospheres EN 60079-0:2009
Equipment – General requirements
Explosive Atmospheres EN 60079-1:2007
Equipment protection by flameproof enclosures
Antenna connector: type-N connector
Form Factor:
Explosion proof according to EN 60079-0: 2009
Ex II 2G Ex d IIB T5 Gb
Protection according to EN60529: IP65
Test certificate DEKRA 12 ATEX 0209
Pressure Housing type TNR 292928
Lid: closed / without disc
Dimensions:
(outside): 190 x 190 x 213 mm (W x H x D)
(inside): 170 x 170 x 131 mm (W x H x D)
Material: 316L stainless steel (V4A)
Surface: shot peened
Ambient temperature: -20°C to +40°C
Warranty: Two-Year Warranty
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

 

> Click to view product manuals and additional GPS EX-PROOF product information on the Meinberg website

APC Technology Group plc

GPSCON : GPS Converter

The Meinberg GPS converter allows the connection of a GPS L1 antenna (1575.42MHz) of other vendors to a Meinberg GPS receiver which uses an intermediate frequency.

The module doesn’t provide any DC voltage for powering active antennas, the DC voltage must be applied externally via the 2-pin screw terminal.

> Request a quote

GPS-CON Technical Specifications

Type of antenna:
GPS L1 C/A-code antenna
receive frequency: 1575.42 MHz
Output frequency: 35.42 MHz intermediate frequency for Meinberg GPS receivers
Electrical connectors:
– female N-Norm connector for GPS antenna (option: female SMA connector)
– female N-Norm connector for Meinberg GPS receiver
– 2-pin Phoenix screw terminal for powering an active antenna
Form Factor:
Aluminium housing for 35mm DIN mounting rails
Height: 105mm, Width: 85mm, Depth: 104mm
Aluminium case for wallmount (bracket holes fit for 19 inch mounting rack)
Height: 44mm, Width: 105mm, Depth: 166mm
Ambient temperature: 0 … 50°C / 32 … 122°F
Warranty: Three-Year Warranty
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

 

> Click to view product manuals and additional GPS-CON product information on the Meinberg website

For more information about our range of Meinberg GNSS antennas contact: