3DIPCC0746-1

3DIPCC0746-1 IP core has been conceived to be integrated into the 3D Plus CMOS Space Camera modules: 3DCM739 (RGB sensor) and 3DCM734 (monochrome sensor). It provides a simple and efficient interface to support camera applications and processing video data in a user-friendly manner. All internal memories are managed automaically as FIFOs and no addresses have to be managed by the user. However, this architecture does not allow to read the same sequence twice in order to remain simple and transparent to the user.

This IP Core also brings the capability to operate the memories without having to focus on interfaces and especially on radiation mitigation mechanism. The SpaceWire interface is the main user interface and used for:

• Telecommands (eg: dynamic configuration of registers)
• Telemetries (eg: reading sensor's temperature)
• Video data sreaming output, telecommands and telemetries that can be sent asynchronously

The SpaceWire IP Core supports DDR mode (up to 128 Mbps in transmission mode) and is compliant with ECSS-E-ST-50-52C and ECSS-E-ST-50-53C. Finally, eleven static GPIO signals and 2 PWM outputs are availabl and can be managed through this code. 3DIPCC0746-1 IP has been developed according to ECSS-Q-ST-60-02C ESA standards.