APC Smartwave | Multisensor Devices

Multisensor Devices

APC Smartwave provides multi sensor platforms from leading manufacturer – Libelium – allowing our clients to easily deploy Internet of Things networks in an easy and scalable way, ensuring minimum maintenance cost.

The platform consists of a robust waterproof enclosure with specific external sockets to connect the sensors, the solar panel, the antenna and even the USB cable in order to reprogram the node if necessary.

The sensors have been specially designed to be scalable, easy to deploy and maintain. In some applications, a single device measuring multiple parameters can be used to save costs in several areas.

Smart Environment Pro Plug and Sense

Smart Environment PRO enables the Air Quality Index (AQI) calculation, thanks to 16 gas sensors providing extremely accurate ppm values and a high-end particle matter sensor.

Sensors:

Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
Carbon Dioxide (CO₂) [Calibrated]
Molecular Oxygen (O₂) [Calibrated]
Ozone (O3) [Calibrated]
Nitric Oxide (NO) [Calibrated] (low concentrations)
Nitric Dioxide (NO₂) [Calibrated]
Sulfur Dioxide (SO₂) [Calibrated] (high accuracy)
Ammonia (NH3) [Calibrated] (low and high concentrations)
Methane (CH4) [Calibrated] – and other combustible gases
Molecular Hydrogen (H₂) [Calibrated]
Hydrogen Sulfide (H2S) [Calibrated]
Hydrogen Chloride (HCl) [Calibrated]
Hydrogen Cyanide (HCN) [Calibrated]
Phosphine (PH3) [Calibrated]
Ethylene Oxide (ETO) [Calibrated]
Chlorine (Cl₂) [Calibrated]
Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
Temperature
Humidity
Atmospheric pressure
Luminosity (Luxes Accuracy) for Smart Lighting
Ultrasound (distance measurement)

> View Smart Environment PRO Plug and Sense Technical Datasheet

Smart Environment PRO Plug and Sense Applications

Forest Fire Detection – Monitoring of combustion gases and preemptive fire conditions to define alert zones.

Air Pollution – Control of CO₂ emissions of factories, pollution emitted by cars and toxic gases generated in farms.

Snow Level Monitoring – Snow level measurement to know in real time the quality of ski tracks and allow security corps avalanche prevention.

Landslide and Avalanche Prevention – Monitoring of soil moisture, vibrations and earth density to detect dangerous patterns in land conditions.

Earthquake Early Detection – Distributed control in specific places of tremors

Smart Agriculture Plug and Sense

Smart Agriculture is designed to perform general agriculture related measurements (vineyards monitoring for enhancing wine quality, selective irrigation on golf courses and conditions control in greenhouses among others). Smart Agriculture devices can also work as a smart weather station.

Sensors:

Soil moisture (3 depths)
Soil temperature
Leaf wetness
Solar radiation (PAR and UV)
Atmospheric pressure
Stem, truck and fruit diameter
Anemometer
Wind vane
Pluviometer
Air temperature
Air humidity
Luminosity (Luxes Accuracy) for Smart Lighting
Ultrasound (distance measurement)

> View Smart Agriculture Plug and Sense Technical Datasheet

Smart Water Ions Plug and Sense

Smart Water Ions measure ions concentration, enabling the monitoring of water quality control in rivers, lakes and the sea.

Sensors:

Ammonium (NH4+)
Bromide (Br-)
Calcium (Ca₂+)
Chloride (Cl-)
Cupric (Cu₂+)
Fluoride (F-)
Iodide (I-)
Lithium (Li+)
Magnesium (Mg2+)
Nitrate (NO3-)
Nitrite (NO₂-)
Perchlorate (CIO4-)
Potassium (K+)
Silver (Ag+)
Sodium (Na+)
Temperature
pH

> View Smart Water Ions Plug and Sense Technical Datasheet

Smart Cities Pro Plug and Sense

The main applications for this Waspmote Plug and Sense model are noise maps (monitor in real time the acoustic levels in the streets of a city [LeqA in dBA]), air quality, waste management and smart lighting.

Sensors:

Noise / Sound Level Sensor (dBA / LeqA) + Calibration Tests
Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
Carbon Dioxide (CO₂) [Calibrated]
Molecular Oxygen (O₂) [Calibrated]
Ozone (O3) [Calibrated]
Nitric Oxide (NO) [Calibrated] (low concentrations)
Nitric Dioxide (NO₂) [Calibrated] (high accuracy)
Sulfur Dioxide (SO₂) [Calibrated] (high accuracy)
Ammonia (NH3) [Calibrated] (low and high concentrations)
Methane (CH4) [Calibrated] – and other combustible gases
Molecular Hydrogen (H₂) [Calibrated]
Hydrogen Sulfide (H2S) [Calibrated]
Hydrogen Chloride (HCl) [Calibrated]
Hydrogen Cyanide (HCN) [Calibrated]
Phosphine (PH3) [Calibrated]
Ethylene Oxide (ETO) [Calibrated]
Chlorine (Cl₂) [Calibrated]
Temperature
Humidity
Atmospheric pressure
Luminosity (Luxes Accuracy) for Smart Lighting
Ultrasound (distance measurement)

> View Smart Cities PRO Plug and Sense Technical Datasheet

Smart Cities PRO Plug & Sense Applications

Forest Fire Detection – Monitoring of combustion gases and preemptive fire conditions to define alert zones.

Air Pollution – Control of CO₂ emissions of factories, pollution emitted by cars and toxic gases generated in farms.

Snow Level Monitoring – Snow level measurement to know in real time the quality of ski tracks and allow security corps avalanche prevention.

Landslide and Avalanche Prevention – Monitoring of soil moisture, vibrations and earth density to detect dangerous patterns in land conditions.

Earthquake Early Detection – Distributed control in specific places of tremors

Smart Lighting – Intelligent and weather adaptive lighting in street lights

Waste Management – Detection of rubbish levels in containers to optimize the trash collection routes

Smart Roads – Intelligent Highways with warning messages and diversions according to climate conditions and unexpected events like accidents or traffic jams.

Smart Security Plug and Sense

The main applications for this Waspmote Plug and Sense configuration are perimeter access control, liquid presence detection and doors and windows openings. Besides, a relay system allows this model to interact with external electrical machines.
Sensors: