MIL-SPEC Splitters

MIL-SPEC Splitters

MIL-SPEC Splitters

When you need the GNSS signal routed to multiple destinations, GPS Source has an extensive line of Military Standard GPS splitters in a wide array of output and housing form factors. GPS Source, available from APC Time, can provide everything from passive splitters to units that can have custom gain on each output.

For expert technical and product advice, contact our team today on 01522 596 570 or email time@apcplc.com

APC Technology Group plc

Military Qualified 1 x 2 GPS Splitter – MS12

This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.

The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port.

  • Designed and manufactured to military specifications
  • Amplified and passive versions available
  • Passes GPS, galileo, and GLONASS L1/L2, protect GPS
  • Excellent gain flatness
APC Technology Group plc

Military Qualified 1 x 4 GPS Splitter – MS14

This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units.

The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5) would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port.

  • Designed and manufactured to military specifications
  • Amplified and passive versions available
  • Passes GPS, galileo, and GLONASS L1/L2, protect GPS
  • Excellent gain flatness
APC Technology Group plc

Military Qualified 1 x 8 GPS Splitter – MS18

This is a military qualified MS18 GPS splitter with one-input and eight-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between eight receiving GPS units.

The MS18 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3 thru J9) would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port.

Alternatively, the MS18 can be configured with a MIL-STD-704 or MIL-STD-1275 compliant 28 VDC Power Supply that will power the active GPS antenna connected to J1.

  • Designed and manufactured to military specifications
  • Amplified and passive versions available
  • Passes GPS, galileo, and GLONASS L1/L2, protect GPS
  • Excellent gain flatness
APC Technology Group plc

Military Qualified 2 x 2 GPS Splitter – MS22

The MS22 is a military qualified, two-input, two-output, GPS splitter which includes an antenna health sensor and an embedded antenna switch. Dual input ports allow the splitter to be connected to two GPS receive antennas. The sensor monitors the health of the primary antenna connected to the splitter. Based on the information provided by the sensor, the splitter will switch to the secondary antenna in the event of a failure with the primary antenna.

If the failure in the primary is resolved, the splitter will automatically switch back to the primary. The embedded switch has been designed so it can be controlled externally. This external control can also override the internal automatic switch.

  • Embedded antenna health sensor
  • Automatic internal antenna port switch
  • Remote antenna port switching capability
  • Passes GPS L1/L2, secure GPS, GLONASS L1/L2, galileo, BeiDou
  • Optional antenna fault indicator panel
  • Hermetically sealed
  • EMI shielded
APC Technology Group plc

Military Qualified 2 x 2 GPS Splitter (Slimline) – MS22S

The MS22S is a military qualified, two-input, two-output, GPS splitter which includes an antenna health sensor and an embedded antenna switch. Dual input ports allow the splitter to be connected to two GPS receive antennas. The sensor monitors the health of the primary antenna connected to the splitter. Based on the information provided by the sensor, the splitter will switch to the secondary antenna in the event of a failure with the primary antenna.

If the failure in the primary is resolved, the splitter will automatically switch back to the primary. The embedded switch has been designed so it can be controlled externally. This external control can also override the internal automatic switch.

  • Embedded antenna health sensor
  • Automatic internal antenna port switch
  • Remote antenna port switching capability
  • Passes GPS L1/L2, secure GPS, GLONASS L1/L2, galileo, BeiDou
  • Hermetically sealed
  • EMI shielded
APC Technology Group plc

Military Qualified 2 x 4 GPS Splitter – MS24

The MS24 is a military qualified, two-input, two-output, GPS splitter which includes an antenna health sensor and an embedded antenna switch. Dual input ports allow the splitter to be connected to two GPS receive antennas. The sensor monitors the health of the primary antenna connected to the splitter. Based on the information provided by the sensor, the splitter will switch to the secondary antenna in the event of a failure with the primary antenna.

If the failure in the primary is resolved, the splitter will automatically switch back to the primary. The embedded switch has been designed so it can be controlled externally. This external control can also override the internal automatic switch.

  • Embedded antenna health sensor
  • Automatic internal antenna port switch
  • Remote antenna port switching capability
  • Passes GPS L1/L2, secure GPS, GLONASS L1/L2, galileo, BeiDou
  • Optional antenna fault indicator panel
  • Hermetically sealed
  • EMI shielded
APC Technology Group plc

Military Qualified 2 x 4 GPS Splitter (Slimline) – MS24S

The MS24S is a military qualified, two-input, two-output, GPS splitter with a slimline housing.  It includes an antenna health sensor and an embedded antenna switch. Dual input ports allow the splitter to be connected to two GPS receive antennas. The sensor monitors the health of the primary antenna connected to the splitter. Based on the information provided by the sensor, the splitter will switch to the secondary antenna in the event of a failure with the primary antenna.

If the failure in the primary is resolved, the splitter will automatically switch back to the primary. The embedded switch has been designed so it can be controlled externally. This external control can also override the internal automatic switch.

  • Embedded antenna health sensor
  • Automatic internal antenna port switch
  • Remote antenna port switching capability
  • Passes GPS L1/L2, secure GPS, GLONASS L1/L2, galileo, BeiDou
  • Hermetically sealed
  • EMI shielded

For more information about our range of GPS Source products and technology, contact APC Time on: