CS700A

CS700A

CS700A

Cleverscope

Signal Generator (0-10MHz, Sine, Square, Triangle)

The CS700A Signal Generator is a plug-in module for the CS328A and CS320A Oscilloscopes. If you order at the same time as a CS328A or CS320A, the module will be factory fitted.

The CS700 and CS700A have similar specifications but will only work in the relevant systems. "A" versions have serial numbers starting from 4000

The CS700A Signal generator generates sine, square and triangle output waveforms. The amplitude may be varied between 0 and 5V pk-pk, in 10mV steps. The offset maybe varied from –4 to +4V in 10 mV steps. The generator can be FSK and PSK modulated, and Frequency swept. The sweep may be synchronized with the Spectrum Analyser to carry out transfer response measurement. Two of the digital inputs may be allocated to switch between either of the two frequencies or two phases.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Function Generate Sine, Square or Triangle output signals
Absolute Accuracy 50 ppm in 1 year, 0-40 deg C
Frequency Range Sine, Square: 0.003 Hz – 10 MHz Triangle: 0.003Hz – 1 MHz
Protection Short Circuit Protected ± 10V peak overdrive < 1 min
Amplitude Accuracy ± 2%
Resolution 0.003Hz (<1KHz) 0.2 Hz (>1kHz)
Output Impedance 50 ohm
Generation Method Direct Digital Synthesis
Output Sampling Rate 50 MSa/sec
Output Voltage Range 100mV – 5V p-p including DC offset
Output Voltage Resolution 10 mV
Output Voltage Offset Range -4 to +4V
Output Voltage Offset Resolution 10 mV
Frequency Shift Range Any two frequencies in range 0.2Hz – 10 MHz
Signal to Noise Ratio -60 dBc typical
Total Harmonic Distortion 0 – 1 MHz : < -65 dBc > 1 MHz: < -35 dBc
Amplitude Flatness ± 0.2 dB
Square Wave Rise Fall Times < 12 ns
Phase Shift Range Any phase difference between 0 – 360 degrees
More Information
Attribute Value
Data Sheet Click here to view